* An Amazing New Way To Heat Your Home!
                                                                 ( Can also be used as a hot water heater )

Your existing thermostat can all stay the same!  The only thing that should be replaced is the old heating source, everything else can stay the same. The heat can then be controlled by using your old thermostat, your thermostat can turn the unit on and off as needed or you can use the heater as a room to room space heater.  Supplies and parts can be found at any hardware store and purchased from the internet.
( See our plans )

Our Fuelless Heater system can be used as a stand alone home heating system. Built right next to your existing home heating furnace using standard sheet metal and a fan blower connected to your existing air ducts. To get this kind of efficiency, free energy must be used, which comes by using our specially designed full heater package ( drawings and info are included in our plans ).



The Fuelless Heater is very safe to use!  Safer than using Natural Gas!

( The Fuelless Heater is not radio-active or harmful in anyway other than high temperatures )

We recommend that you use our plans to build a small space heater first so you can learn how the device functions, then build a larger heating unit to heat your entire home, garage, or office with.

Our first prototype was a simple soup can heater and it worked very well!  We were amazed at the amount of heat it produced.  We then built a larger bean can heater and it did much better than the small soup can heater. The bean can heater produced 158 degrees F. in just two minutes!  You will find that our heaters are very cheap to build and the parts and supplies are easy to find. The bigger you build this heater the more BTU's the heater will output.

The above drawing shows the main heating unit. A small one hp free energy motor is then added and is used to blow the hot air around a room or furnace air duct system to help heat your entire home.

Copyright 2006 Creative Science & Research

Question:  How does it work? 
Without giving out to much free information,  we will use our small space heater as an example. First we start with a  7" x 11" metal drum ( Which is the outer drum ). Then motor oil is poured into the inner can, It does not use oil, it only uses the atoms from the oil which is very safe to use  and does not produce an odor or smell  because the  outer  container  is tightly sealed. The oil can last for years!  If water is used it would evaporate into steam, so water is not a good choice unless you want to use it as a hot water heater.   A zinc rod or long bolt is then placed and attached in the center of the inner drum, etc...  in return,  a safe heat reaction takes place which creates a strong chain reaction within the atoms of the oil creating an enormous amount of heat!
 
You can buy zinc plated long bolts at any hardware store. Most nuts and bolts are zinc plated.

We believe that a strong magnetic flux may also be penetrating the inner metal drum and creating the strange heating effect,  which is safe to use just about anywhere!  You can also use many other types of liquid as well, such as water, coke, sprite, transmission fluid etc., but it is best and recommended to use 10w40 oil.

Many people heat their homes with natural gas, which is not a safe alternative at all!  Why? Because every year hundreds of people die of gas poisoning and from home gas explosions, but our Fuelless Heater is very safe to use and does not need natural gas to run it! The Fuelless Engine works very well with this device! One of the ways it can be used, is to replace the blower motor with the Fuelless Engine - motor. The blower fan is what blows the heat around a room ( space heater ), or is also used in every home furnace to blow the heat through the entire home using air ducts.