FREE ENERGY HEATING SYSTEM!

Your existing thermostat can all stay the same!  The only thing that should be replaced is the old heating source, everything else can stay the same. The heat can then be controlled by using your old thermostat, your thermostat can turn the unit on and off as needed or you can use the heater as a room to room space heater.  Supplies and parts can be found at any hardware store and purchased from the internet ( See our plans ).

Our Fuelless Heating system can be used as a stand alone home heating system. Built right next to your existing home furnace, using standard sheet metal and a fan blower, and connected to your existing air ducts. Or it can be custom built to fit into your existing furnace. To get this kind of high efficiency free energy is produced and applied as the reaction is started. 



The Fuelless Heater is very safe to use!  Safer than using Natural Gas!
( Our Heater is not radio-active or harmful in anyway other than high temperatures )


We recommend that you use our plans to build a small space heater first so you can learn how the device functions, then build a larger heating unit to heat your entire home, garage, or office with.

Our first prototype was a simple soup can heater and it worked very well!  We were amazed at the amount of heat it produced.  We then built a larger bean can heater and it did much better than the small soup can heater. The bean can heater produced 158 degrees F. in just two minutes!  You will find that our heaters are very cheap to build and the parts and supplies are easy to find. The bigger you build this heater the more BTU's the heater will output.
                                                               
                                                Copyright 2010 Creative Science & Research

The above drawing shows the main heating unit. A zinc rod or long bolt is placed and attached in the center of the inner drum. A small free energy motor such as the Fuelless Engine, is then added and is used to blow the hot air around a room or furnace air duct system to help heat your entire home. You do not have our Fuelless Engine, you can use any type of AC or DC motor.



Question:  How does it work? 
Without giving out to much free information and using our small space heater as an example, We first start with a  7" x 11" metal drum ( Which is the outer drum ). Then motor oil is then poured into the inner can, It does not consume the oil, it only uses the atoms from the oil which is very safe to use, and does not produce any odor or smell just as long as the outer container is tightly sealed. The oil can last for many years!  Water can also be used and is great as a hot water heater or steam boiler system. We have a customer that used our heater to heat his existing under the floor pipe heating system in his home, and is very happy with it!

        
 
You can buy zinc plated long bolts at any hardware store. Most nuts and bolts are zinc plated.


                           
             Knowledge Is Power!


This heater is safe to use just about anywhere!  You can also use many other types of liquid as well, such as water, coke, sprite, transmission fluid etc., but we recommend you use 10w 30 or 40 motor oil.


Safety:
Many people heat their homes with natural gas, which is not a safe alternative at all!  Why? Because every year hundreds of people die of natural gas poisoning and from home gas explosions, but our Fuelless Heater is very safe to use and does not need natural gas to run it! One of the ways it can be used, is to replace the blower motor with the Fuelless Engine - motor. The blower fan is what blows the heat around a room ( space heater ), or is also used in every home furnace to blow the heat through the entire home using air ducts